Preparation and physical properties of the layered niobate Cu0.5Nb3O8: Application to photocatalytic hydrogen evolution

The new layered niobate Cu_0.5Nb₃O₈ is synthesized by soft chemistry in aqueous electrolyte via Cu²⁺→H⁺ exchange between copper nitrate and HNb₃O₈·H₂O. The characterization of the exchanged product is made by means of thermal gravimetry, chemical analysis, X-ray diffraction and IR spectroscopy. Thermal analysis shows a conversion to anhydrous compound above 500 °C. The oxide displays a semiconductor like behavior; the thermal variation of the conductivity shows that d electrons are strongly localized and the conduction is thermally activated with activation energy of 0.13 eV. The temperature dependence of the thermopower is indicative of an extrinsic conductivity; the electrons are dominant carriers in conformity with an anodic photocurrent. Indeed, the Mott–Schottky plot confirms n-type conduction from which a flat band potential of −0.82 V_SCE, an electronic density of 8.72×10¹⁹ m⁻³ and a depletion width of 4.4 nm are determined. The upper valence band, located at ~5.8 eV below vacuum is made up predominantly of Cu²⁺: 3d with a small admixture of O²⁻: 2p orbitals whereas the conduction band consists of empty Nb⁵⁺: 5s level. The energy band diagram shows the feasibility of the oxide for the photocatalytic hydrogen production upon visible light (29 mW cm⁻²) with a rate evolution of 0.31 mL g⁻¹ min⁻¹.     

可见光引发剂研究进展

光固化技术的应用非常广泛，常用于光固化涂料、油墨、牙科固化、胶粘剂以及 3D打印材料等领域。与紫外光固化相比，可见光固化具备辐射安全、固化深度高、设备价格低廉等优势。作为光固化体系的重要组成部分，光引发剂的研究一直备受关注。本文对近 2~3 a可见光引发剂的研究进展进行了综述，主要从 TPO类、萘酰亚胺类、蒽醌类、咔唑类、硅酮类、肟酯类、共轭染料类、光生酸剂类和金属配合物类光引发剂 9个方面进行了综述，并对可见光引发剂的发展方向做了简单的概述。     

Electroactive polymers containing 3-arylcarbazolyl units as hole transporting materials for OLEDs

Monomers and their polymers containing 3-arylcarbazolyl electrophores have been synthesized by the multi-step synthetic route. The materials were characterized by thermo-gravimetric analysis, differential scanning calorimetry and electron photoemission technique. The polymers represent materials of high thermal stability having initial thermal degradation temperatures in the range of 331–411 °C. The glass transition temperatures of the amorphous polymeric materials were in the rage of 148–175 °C. The electron photoemission spectra of thin layers of monomers showed ionization potentials in the range of 5.6–5.65 eV. Hole-transporting properties of the polymers were tested in the structures of organic light emitting diodes with Alq₃ as the green emitter. The device containing hole-transporting layers of polyether with 3-naphthylcarbazolyl groups exhibited the best overall performance with a maximum current efficiency of 3.3 cd/A and maximum brightness of about 1000 cd/m².     

Influence of solvent characteristics in triaxial electrospun fiber formation

Triaxial electrospinning is a novel method for fabrication of multilayered nano and microsize fibers with desirable features for particular applications. Since the effect of solvent volatilities in each layer and relative polymer molecular weights on uniform encapsulation of the core polymer process is not well understood, we evaluated (i) the role of solvent volatilities, and (ii) molecular weights using cellulose acetate (CA, 30 kDa), polycaprolactone (PCL, 45 kDa and 80 kDa), mineral oil, and polyvinyl alcohol (PVA, 30 kDa and 100 kDa). Different solvent mixtures were evaluated based on the boiling points determined using a simulator. Inner mineral oil was selectively removed to form Hollow fibers. Analysis of chemical compositions using FT-IR and DSC revealed the presence of each component. 24-h viability of human umbilical vein endothelial cells indicated the formed fibers were not toxic. Scanning electron micrographs indicated the formation of triaxial structured fiber of outer hydrophobic PCL/CA/Hollow, PCL/PVA/Hollow and outer hydrophilic CA/PCL/Hollow fibers. Tensile tests (both wet and dry) revealed that PCL/CA/Hollow fibers had increased stiffness and load carrying capacity than CA/PCL/Hollow fibers. Successful fiber formation was dependent on ensuring that the outer shell formed first i.e., the relative solvent volatility of encapsulating core polymer to lower than that of the shell polymer.     

Study on metamerism degree evaluation based on wavelength sensitive cone weighting algorithm

Metamerism phenomenon can be used in illuminant detection to ensure the accuracy of light source. A method based on Long‐, Middle‐, Short‐ wavelength cones(LMS) weighting algorithm to evaluate metamerism degree is proposed. The chromatic relationship between the degree of metamerism mismatch and the light source is studied. Herein, the consistency between the metameric indices (MIs) and CIE1976 L*a*b* color difference ranking is analyzed by SRCC, KRCC, PLCC and RMSE. A statistically sampling method to obtain practical LMS cone fundamentals to evaluate metamerism degree is employed. The analysis results obtained show that the method based on LMS weighting algorithm has good evaluation ability and stability in simulation experiments and statistically sampling experiments, which are in line with visual characteristics of human. Proposed method meets the requirements of selecting metameric pairs used in light source detection. The analysis results have certain guiding significance.     

Warm-white light performance of Dy3+, Eu3+: NaLa(WO4)2 phosphors excited with a 450-nm LED

Dy³⁺, Eu³⁺: NaLa(WO₄)₂ phosphors are successfully synthesized through the solid-state reaction technique. The phase-structure and morphology are measured via X-ray diffraction and energy dispersive spectrometry. The concentrations of Dy³⁺, Eu³⁺, La³⁺, and W⁶⁺ are measured via ICP. The absorption and excited spectra are presented, which indicate that a blue band ranging from 430 to 480 nm is suitable for excitation. Using a commercial blue LED with a wavelength of 450 nm as the excitation light source, emission spectra for samples with varying dopant concentration ratios of Dy³⁺ to Eu³⁺ are obtained, which show good tunable yellow and red emission. For the purpose of investigating white LED performance, CIE spectra and a white light photo are also presented. The results reveal that varying the dopant concentration ratio of Dy³⁺ to Eu³⁺ plays a key role in the warm-white performance. With increasing concentration of Eu³⁺, the correlated color temperature decreases from 4069 to 3172 K, which indicates good warm-white performance.     

Photogenerated-hole scavenger for enhancing photocatalytic chalcopyrite bioleaching

The effects of photogenerated-hole scavengers (ascorbic acid, oxalic acid, humic acid and citric acid) on chalcopyrite bioleaching in the presence of visible light were studied using Acidithiobacillus ferrooxidans (A. ferrooxidans). Four sets of bioleaching experiments were performed: (1) visible light + 0 g/L scavenger, (2) visible light + 0.1 g/L of different scavenger (ascorbic acid, oxalic acid, humic acid and citric acid), (3) dark + 0.1 g/L of different scavenger (ascorbic acid, oxalic acid, humic acid and citric acid), and (4) dark + 0 g/L scavenger (control group). The results showed that ascorbic acid and oxalic acid could act as photogenerated-hole scavengers and significantly enhance chalcopyrite bioleaching under visible light. The dissolved copper in the light group without scavenger was only 18.7% higher than that of the control group. The copper extraction rates of the light groups with oxalic acid and ascorbic acid were respectively 30.1% and 32.5% higher than those of the control group. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) analyses indicated that ascorbic acid and oxalic acid as photogenerated-hole scavenger could capture photo-generated holes and inhibit jarosite formation on the chalcopyrite surface, thereby enhancing bioleaching of chalcopyrite under visible light.     

不同紫外波长对热塑性淀粉塑料表面的光交联改性研究

为有效提高热塑性淀粉塑料（TPS）的力学和耐水性能，本文提出用不同波长的紫外光照的方法来实现TPS表面的光交联改性。将光引发剂2,4,6?三甲基苯甲酰基二苯基氧化膦（TPO）的乙醇溶液涂覆于TPS表面后进行紫外光照射，研究了不同紫外光波长（254、308、365 nm）对TPS交联度、力学性能、动态力学性能、耐水性和吸湿性的影响。结果表明，与254 nm和365 nm紫外光照后的样品相比，308 nm光照后TPS样品的拉伸、弯曲和冲击强度最大，分别为4.1 MPa，2.7 MPa和96.8 kJ/m²;TPS中淀粉富集区的玻璃化转变温度（T_α）、甘油富集区的玻璃化转变温度（T_β）分别达最高为-37.48 ℃和50.32 ℃，表面接触角最大为75 °，吸水性能也得到显著改善，交联度结果证实此时形成了最佳的交联结构。